Page Comparison

...

1. Download Docker Desktop for Apple Silicon (https://www.docker.com/products/docker-desktop/ )

2. Install the latest version of vagrant (https://www.vagrantup.com/downloads )

   1. For M1s, you can use brew or you can download the ARM64 version

3. Clone the repo: git clone https://github.com/uw-midsun/box.git

4. Go to your box directory and switch to master branch

   1. You can check if you are on the master branch if you run git branch

      Code Block
      ~ % cd box box % git checkout master

5. Before running vagrant up , make sure that you have docker open

6. Run vagrant up --provider=docker

7. Run vagrant ssh

8. Run cd shared

9. Run git clone https://github.com/uw-midsun/fwxv.git && cd fwxv (if you clone with https, you will need to set up an ssh key later which is covered in our setup page)

10. Run scons sim --project=leds --platform=x86 to test that your environment is working correctly. If it compiles and runs your environment is set up. Correct output will be constant printing of “blink.” To stop the output, just click ctr + c.

11. If you get to this step and are following the FW101 setup, please return to the setup page Setup

👾 Guide to flashing on M1s

...