...
3M structural adhesive left underneath the cabinet (we have 6, we need 2)
The mix ratio is 2:1 and provides 20 minutes of work-life, allowing time to adjust for the desired fit prior to curing. This adhesive reaches handling strength in approximately two hours and is fully cured in 24 hours at 72 °F (22 °C).
Make sure the gun matches, push and pull the tabs
Use quadro static mix nozzle (we have 5, we need 2)
It is recommended to use a new tip or mixer nozzle for each cartridge
MAKE SURE TO TILT UPWARDS AND TRY TO GLUE
Gasket:
cut to-size
not a priority
...