...
Clamping width pieces: should be straight forward because there are holes in the fibre-glass due to vent + fan holders. Orient the box so there is room on the sides to clamp
Clamping length pieces: ~3.5cm from the top of the steel frame to the top of the fibre-glass. Grab the metal clamps from the drawer in the bay and clamp the top. To ensure the bottom is flush grab something heavy and place along the bottom and sides
Wait for epoxy to dry
Cut adhesive gasket by 1/2 to make it 1/4 inch thick, then epoxy to lid, clamp, and let dry for 24 hours (ask Michael if waiting for 24 hours is necessary) before proceeding
...