...
The steps referred to in this doc are found here: Module Step-by-Step Procedure
This page will have all relevant updates to where we currently are in terms of quantity of modules after it has been run through Donna
Please send updates of progress if working on modules throughout the week on the Mech-Battery-Box channel on Slack
Assembly Name | Quantity | Dependency |
|---|---|---|
Soldered Voltage Taps | 14 Double ones (11 Thick, 3 thin) 40 Singles (36 thin, 4 thick) |
|
Potted Busbar to Top Cell Holder | 911 |
|
Soldered SigmaClad Busbars | 7 |
|
Modules w/ Cells | 1 |
|
Spot Welded Modules | 1 |
|
Total Modules | 1 |
...
Current number of potted busbars (as of Nov. 6th8th): 911
Current number of soldered busbars (as of Nov. 6th8th): 7
Current number of soldered voltage tap sets (as of Nov. 6th): 0 - need to check in bay
...