...
Task | Milestones | DRIs |
|---|---|---|
Tub |
Foam split up in MasterCAM - March 18th Start mold manufacturing - March 20th Conceptual Resin Lines Concepts - March 31st Reach out to professions for consult - March 31st Build structure for left plug - April 1st Finish left of half plug - April 3rd Build structure for right plug - April 15th Finish right half of plug - April 17th Material cut plan for fiberglass - June 23rd Finish surface prep - June 30th Material Prep - June 30th Fiberglass layup - July 1st Build mold platform - July 2nd Material cut plan for carbon - July 6th Material prep - July 7th Carbon fiber Layup - July 8th | Michael Entire team to help with mold prep and construction |
Wheel Cover | Conceptual design of mechanism - March 16th DFM/DFA review with Michael - March 23rd Mold CAD concept - March 30th Finalize mold CAD - April 6th Wheel cover CAD in the car - April 30th | Matthew Tania Dhruv Sonny Janushan Jeniton Aditi Melinda |
Ribs |
Ribs FEA with roof - April 12th Finalize rib design - April 30th Rib layup - May 20th | Matthew Nathan Michael , Jens, Mido (for FEA review) |
Wheel Well | TBD - Dependent on Dynamics | Jasmine |
Floor Panel | Concept design of floor (integration) - March 21st Floor CAD complete - March 31st Floor FEA - April 11th Foam breakdown of floor - April 15th Layup - May 6th | Michael |
Roof | Mold concept - March 21st Mold with cutout and alignments - March 31st Foam breakdown of mold - April 10th Start Machining - July 26th Finish mold surface prep - September 15th Material prep - September 15th Layup - September 16th | |
Canopy | Mold concept - March 21st Mold with cutout and alignments - March 31st Foam breakdown of mold - April 10th Start Machining - July 3rd Material cut plan for fiberglass - July 23rd Finish mold surface prep - July 31st Fiberglass material prep - July 31st Material cut plan for carbon - August 3rd Material prep - August 4thth Carbon material prep - August 5th Layup - August 5th | |
Aero-Chassis Integration | Finalized concept - April 30th | Michael Matthew Mido |
Ventilation | Ventilation concept - August 31st | Michael |
Lights | Refer to this confluence page: | Jasmine Fatima Ryan Dhruv Althea Carina Noah Edward Jeniton |
Windshield |
Windshield Mold CAD Concept - March 12th
Back Windshield Mold CAD Concept - March 12th Finalized Mold CAD - Dependent on Thermoformer Plan to have Windshield in the bay by - August 15th Integration into Canopy - TBD | Jasmine |
...