...
A365 is a great resource for creating board models. The PCB can be viewed in 3D mode and from there, the connector placement is easily seen.
Confluence can provide lots of information on connections between boards (though not all of it will be very neat or easy to find). It’s worth digging around for a bit for some relevant information.
If the connections between boards are not clear from any of the above resources, consider contacting the person who worked on the board.
General information on connectors: Connectors
List of available wires:
| Google drive sheets | ||
|---|---|---|
|
Electrical enclosures: Electrical Enclosures
Contact Nita E if there are any questions or if Google Drive access is required for any of the documents mentioned on this page.
...