...
The idea behind this design is to create a “tray” (Fig. 1) to constrain movement in the outer edges of the specimens. Multiple specimens can be cured at the same time in this tray. The spaces between each individual specimen will be separated with skewers (Fig. 2) as well as the spaces between each adhesive joint on a specimen (Fig. 3). A flat board/weights will be placed on top of all specimens to add pressure.
...
Fig. 1
...
...
Fig. 2
Adhesive Anti-Sticking Solution
Adhesive to be Used: ?
For Epoxy:
Parchment Paper
Wax Paper
Fig. 3