...
Adhere to all the safety specifications as listed by ASC
Accommodate a five point safety harness
will likely have openings in the seat
similar to race bucket seats (Corbeau racing seats were used last yearin MS12)
research into this (where to place openings etc.)
integration of head, shoulder and side containment features into the seat
prevent lateral movement of the body
must ensure this does not interfere with egress and peripheral vision of the driver
have head restraints more near the cheek bone to lower jaw
thus not obstructing as much peripheral vision
seat belt passthrough should be right at the shoulder height of the driver
...
Ensure there is enough space for occupant to turn when inside the seat
OCCUPANTS MUST BE ABLE TO GET IN AND OUT EASILY (in the event of an emergency)
Because the seat will be tilted backwards, the posture of the occupant will be more akin to the diagram shown below
though with the heels not flat but rather angled as well
in the second and third picture is the seat curvature of another solar car w/ similar seat setup as MS14
...
   Features / Design choices to enable an ergonomic and comfortable chair
...