Assembly instructions for the tie rod, centerlink assembly and steering arm.
BOM
Number | Part Name | Quantity |
|---|---|---|
1 | Centerlink Assembly | 1 |
2 | Tie rod | 1 |
3 | Steering arm | 1 |
4 | 95085K25 centerlink shim 0.5mm | 2 |
5 | 90128A27 M8 x 1.25-35 | 4 |
6 | 94645A210 M8 Nylon Locknut | 4 |
Instructions
Tie rod to centerlink assembly:
Insert the two #4’s and #2 into #1 as shown, ensuring the holes of the parts are aligned. Note that #2 rests between the two #4’s.
2. Insert #5 into the hole of #1. Put #6 into the threads of #5 and tighten.
Tie rod to steering arm:
3. Position #3 by aligning its hole with the hole at the other end of #2.
4. Insert #5 into the hole of #3. Put #6 onto the threads of #5 and tighten.
5. Repeat on the other side.
Done 