Instructions for assembly of rack and pinion to chassis and steering.
BOM
Part Number | Part Name | Qty | Assembly |
|---|---|---|---|
1 | Rack and Pinion | 1 | |
2 | Centerlink on Chassis Assem | 1 | |
3 | MSXIV-STR011-Rack Mount | 1 | |
4 | M6x1.00-50 SHCS | 2 | |
5 | M6X1.00-40 SHCS | 2 | |
6 | M8x1.25-45 SHCS | 1 | |
7 | M8 Lock nut | 1 | |
8 | 1.5mm Ring Shim | 2 | |
9 | 2mm Ring Shim | 2 |
Instructions
Attach the rack mount (#3) to the chassis using 2x M6-40 SHCS (#5) using the bottom two holes of #3 and the holes in chassis.
Slide the rack (#1) so the rod end of the rack sits between the centerlink clevis, attach the rack using 2x M6-40 SHCS (#4) putting it through the middle two holes of the rack and the top two holes of the rack mount (#3).
Note: red circled holes are concentric.
Slide 1x #8 and #9 (1.5mm and 2mm ring shims) on each side of the rod end and clevis. Then secure the rack to the clevis using #6 and #7 (M8-45 SHCS and M8 locknut).
Done
