Electrical Mockup Connections spreadsheet walkthrough

Owned by Lucy He
Last updated: Oct 14, 2021
1 min read

Note:

  • For reviewing phase 1, if you don't know which enclosure a board is in, you can also look for it in the Electrical Overview diagram.

https://drive.google.com/drive/u/0/folders/1DWjR-UMUw11k_3tJKFhjX0ZX43lBTu8d

  • The format of each column is listed in the Column Explanations page of the spreadsheet.

  • The connector designator (usually in the form of P#) are not always shown on the mockup diagram, please check the schematics of that board in Altium to for the designators.

Please ask questions in the mockup-diagram channel on Slack if you are unsure about something!