Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Due to changing a regulations, charging must now have a relay.

The relay is controlled by the charger interface board.

HV Relay Driver

This circuit is copied from the BMS carrier. PB0 is one of the two pins that must be enabled to activate the relay.

Load Switch

datasheet: https://www.infineon.com/dgdl/Infineon-BTS7040-1EPA-DS-v01_00-EN.pdf?fileId=5546d462636cc8fb0163fe8f965308bc

  • No labels