Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

AFE

Revision 1  

Retrospective

  • Needs power LED so we can tell if the board is powered
  • Through-holes need to be widened
  • Test points should be through-hole (SMT pads are too sketchy for HV)
  • Use smaller analog mux?
  • Turns out the LTC6804 requires Vtop and Vbottom to be connected?
  • T_SELx need to have pullup resistors to Vreg (they're open-drain) - see pg60 in the LTC6804 datasheet

Carrier

  • No labels