05-2023
During the test, the capacitor discharge circuit started smoking
Once working, DCDC output max is 10.6-10.7V
17-06-2023
R7: 549.5; R8: 4.715k; R9: 1k
So looks like R8 is off as it should be 10k
TR to HV GR it's only 3.511kohms (should be a little over 15kR)
6-2023
Replaced R8 to 10k ohms resistor, but seems like the resistor removed was 10k
Connected back to the power supply and load no change in output voltage
27-06-2023
mosfet gate and drain/source is not shorted
r8 is replaced with 10kohm resistor
30-06-2023
Testing the DCDC output with the replaced resistor (R8)
Test 1: Replaced resistor
CC (Load): 0.100A
Voltage (PSU): 60-100V
Power consumption: ~1.060W
Results:
no resistance across TR and HV GND
outputting ~10.6-10.8 volts from the range
Test 2: Removed R10
no resistance from TR to HV GND
Voltage output is slightly higher, around 10.7V at 60V input
Test 3: Replaced Q2
Same conditions: input voltage 60V
Same output voltage: ~10.7V
Suspected leg 2 of Q2 is not properly connected
when checking conductivity leg 1 & 3 were good