Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

This document has a table (bottom) that will be filled out each time a member of the electrical team is on-site. It will help us know what’s going on and if we are following the timelines on this sheet:

Date

Individual

Progress

Concerns

sept. 18

Jess

Got CANable adapters working, updated smoke_mcp2515 firmware so it works now.

verified mcp2515 works on MCI rev 5 that has the CANable adapter soldered to it.

Questions:

  • is steering rev 4 ok to validate on?

  • where are all the power supplies? how long will the aux battery last?

CANable adapter should probably not be soldered to the board in future. Also had to sacrifice a system CAN terminating resistor in the debug process, sorry

Blockers:

  • missing pedal

  • missing steering stalk + steering rev 5?

sept 21 - 9am

Aashmika + Kristen

  • we went in and put away aashmika’s stuff and organized a bunch of boxes

  • looked for pedal

  • could not find pedal → thinking someone on the team maybe took it home?

  • found steering stalk and steering board (dont remember rev, but it’s attached to the stalk)

sept 25

Jess

Figured out how to connect steering stalk to rev 4, tested some firmware

  • not much of it worked 😞

  • returned MCI box (including aux battery) to the rest of the boxes

  • Put CANable adapters in the firmware box on the shelf next to the wire rack

  • Will have to do some work to fix firmware for steering? or at least work to figure out where all the gpio pins go

  • No labels