Bottom

Side

Door

Fairing Front

The fairing portion refers to the flange which the fairing cover will be placed on. The purpose is to allow for a highly streamlined connection between the side aerobody panel and the wheel cover panels with minimal spaces.

Specs for this part:

The flange along the fairing should extend 15mm inwards (vector direction to the centre of the fairing)
Distance between the flange and the aerobody should be 1/8" inwards to accommodate for the thickness of the wheel cover (which will be 1/8")
Thickness of the flange should be 1/8"
Include cut lines for removal of the center portion of the flange

Diagram TBD

Fairing Back

This section is highly similar to the Front Fairings.

The fairing portion refers to the flange which the fairing cover will be placed on. The purpose is to allow for a highly streamlined connection between the side aerobody panel and the wheel cover panels with minimal spaces.

Specs for this part:

The flange along the fairing should extend 15mm inwards (vector direction to the centre of the fairing)
Distance between the flange and the aerobody should be 1/8" inwards to accommodate for the thickness of the wheel cover (which will be 1/8")
Thickness of the flange should be 1/8"
Include cut lines for removal of the center portion of the flange

Wheel Cover (Front)

Wheel Cover (Back)

Important Consideration: Must consider chasis that may interfere with this flange.

Dash

Middle Roof

Trunk Top

Rear Bridge

Middle Bridge

Headlight

Browser not supported