Master Cylinder Mount V2 FEA

Note: Used the same forces as the previous simulation.

Material: 4130 Alloy Steel annealed at 865C

Yield Strength: 4.600e+08

Fillets to simulate welds.

Fixtures:

On flat faces to restrict planar movement.

Interactions:

These are all virtual walls where the part comes into connect with other parts.

Loading (Calculations taken from previous sim):

The typical amount of force is 1831.5N (333N from the driver but amplified by 5.5MA), but it is saftey factored to have a 3666.3N load.

Mesh:

Mesh Controlled, on the weld and the width of the sheet metal:

Results: