Cables in hinges
Good for cables that go around hinges. Cable tracks can provide support and keep a uniform motion when moving around a corner.
Cables in hot places - don’t worry about this, they got it.
It is also resistant to auto fluids, chemicals, abrasion, and self-extinguishing which allows you to secure wires, cables, and small hoses effectively and with confidence.
Cables that are supposed to be stationary
Good for running cables along framing. These clamps are pretty sexy because 100 of them cost $72.
Not sure about the length they come in though, but they would be good to keep cables that go around corners from bouncing around.
Ways to fasten clamps to car
zip ties
screws
glue/epoxy
Criteria and constraints so far
Keep things away from chassis
Stationary and away from surfaces
Widest to motor controllers, 7mm cables x3
Smallest bundles of 1.8mm cables x4 minimum
5mm away from any surfaces
Should be able to be 3D printed