Controller Board: MS 14

Controller Board Validation

Board ID	Blinking LEDs	Tutorial Board: ADC	Tutorial Board: Button Press
1	Not Working	Not Working	S1 Green Button Works S2 Yellow Button does not work PB4 Yellow does not turn off
2	Working	Working	PB3 Red shorted Bright light when off PB4 Yellow shorted Dim light when dured off
3	Working	Not working Stuck around 1870	Working
4 (Dead board?)	Not working No LEDs work	Not Working Does not even show ADC	Buttons do not work
5 (Dead board?)	No LED (Program unable to find device)	Not working Does not show ADC	No LED are turned on
6(Dead board?)	Nothing works for this (Program is never able to find the device)
7	Works	Works	Works
8	Works However PA15 does not blink	Works	Works
9 (Cannot read)	Not Working	Not Working	Not working
10 (Cannot read)	Doesn't work LEDs are always blinking when plugged in even when blinking LEDs program is not run	Not Working	Not Working
11 (Cannot read)	Doesn't work PB4 Yellow LED is turned on without tutorial board PB3 Red LED is turned on with tutorial board	not working	Not Working Pressing green button without program turns on LED1 and PB3 Red LED
12 (Dead board?) (Cannot read)	Doesn't work	Doesn't work	Doesn't work

Benchmark

Testing lights: Use any controller board works

ADC: Controller board 8 + Tutorial board 2

Buttons Press: Controller board 8 + Tutorial board 5