Front Power Distribution:
- Wurth terminals for M4 screw size
- Do we need to have parking lights?
- label PCB
- key the connnectors
- driver fans
- validate load switch on old board
Solar:
- spec ideal diodes
- finish block diagram layout
MCI:
- led for when discharge is done
- added thermistor
- finish adding fans connector to turn it on
- put voltage divider for vout of opto-isolator
BMS Carrier:
- going to validate with firmware for enable pulled low
- power budget for BMS because of Rpi
- USB connectors on rpi for IMU ← confirm I2C to usb connector and vacant ports
Steering
- no push to talk on steering wheel