For future battery-enclosure panels:
It is better to laminate from downwards-up
Reduces risk for dry-spots - the resin cannot just flow in-accordance to gravity
Depends on the scale of the part
Perforate your core with 1/8” holes spaced around an inch aparthelps the resin flow-through adequately through both-sides
can use school’s CNC machine to program and cut-holes
Always perform a vacuum-drop test before starting infusions
Use breather if-possible to prevent the bag from being punctured
Always add lots of pleats to your bag so that every-crevice is covered
Instead of wrapping the chromate tape around
Two calculations for resin:
Male versus Female Mold:
Male molds are better for when you want the out-side of your part to look nice, for example for the aero of the car ________