Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Rev 2

  • Fix diode silkscreen on the bottom of the board
  • Remove R2, replace R1 with a smaller value
  • Q1 should have 1/2/4/6 and 4 swapped 
  • Ultra-fit and Dura-Clik connectors instead of Clik-Mates
  • Consider adding XOR between Vcc and Comparator output 
  • Add passthrough for relay sense line (shorted when relay is closed, open circuit when relay is open)
  • Fix logic issue with the latch
  • Fix voltage drop with MOSFET stages
  • No labels