Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 5
Next »
| Validation Steps | Status | Blockers |
|---|
PWM | - Verify pin can output PWM signal
- Test different levels of PWM to verify that library works correctly
- Verify all PWM methods
| | |
Relay Enables | - Verify Enables can be set and read at connector
| | |
Relay Senses | - Verify that relays sense pins can be set at connector (with power supply) and read at stm32
| | |
Fan Fault | - Set fan fault condition, verify read at stm32
| | |
SPI-isoSPI | - Verify IsoSPI can be transmitted from the CB correctly
- Interface with AFEs
| | |
iso I2C | - Verify iso-i2c out of board works correctly
| | |
Kill switch | - Test kill switch can be read correctly
| | |
Current Sense Alert | - Verify current sense alert can be read
| | Current sense working |