Total cost for 1 FSU (not acounting for cost reduction due to quantity): $234.34
Small Clevises: x4 (total cost: $80.96)
Requires: slight part modification, shoulder bolt, bushing, castle nut and washers
Part modification:
Four small clevises need to have the diameter of their bolt holes increased from 8mm to 12mm.
Shoulder bolt:
90265A355 - https://www.mcmaster.com/90265A355/:
Bushing: x2 per small clevis
6658K157 - https://www.mcmaster.com/6658K157/:
$2.12
12 → 16mm conversion
10mm long
Wheel Attachment: x2 (total cost: $32.06)
Shock to Clevises: (total cost: $5.30)
Requires: slight part modification, off the shelf modification, shoulder bolt, bushing, castle nut and washers
Part modification:
Clevis needs its bolt hole diameter decreased to 12mm where it connects to the shock. Nate already had the sim for this part set up so its been resimed and passes with the new diameter.
Shoulder bolt:
92981A430 - https://www.mcmaster.com/92981A430/:
Shock to Wheel Set: (total cost: $20.94) NEEDS REVIEW
Castle Nuts: (total cost: $50.36)
Washers: (total cost: $44.72)
Requires: M10, M8, 10-32, Plus 2 additional