Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Total cost for 1 FSU (not acounting for cost reduction due to quantity): $211.59

Small Clevises: x4 (total cost: $80.96)

 Requires: slight part modification, shoulder bolt, bushing, castle nut and washers

Part modification:

Four small clevises need to have the diameter of their bolt holes increased from 8mm to 12mm.

Shoulder bolt:

90265A355 - https://www.mcmaster.com/90265A355/:

  • $16.00

  • M10

Bushing: x2 per small clevis

6658K157 - https://www.mcmaster.com/6658K157/:

  • $2.12

  • 12 → 16mm conversion

  • 10mm long

Wheel Attachment: x2 (total cost: $25.68)

 Requires: off the shelf modification, shoulder bolt, bushing, castle nut and washers

Off the shelf modification:

25.4mm bushings need to be cut into two 10mm bushings

Shoulder bolt: Thread length too small, need longer bolt

94361A119 - https://www.mcmaster.com/94361A119/:

  • $7.54

  • 10-32 thread

  • 50.8mm long (2inches)

  • Required length is 51mm so 0.2mm of threads would be under preasure

Bushing

6381K42 - https://www.mcmaster.com/6381K42/:

  • $5.30

  • 6.35 → 9.525mm conversion (1/4 → 3/8 inches)

  • 25.4mm long (1 inch)

  • Needs to be cut into two 10mm parts

Shock to Clevises: (total cost: $8.69)

 Requires: slight part modification, off the shelf modification, shoulder bolt, bushing, castle nut and washers

Part modification:

Clevis needs its bolt hole diameter decreased to 12mm where it connects to the shock. Nate already had the sim for this part set up so its been resimed and passes with the new diameter.

Shoulder bolt:

92981A430 - https://www.mcmaster.com/92981A430/:

  • $5.30

  • M10

Required Washer:

??? - ??:

  • ?

Shock to Wheel Set: (total cost: $45.05)

 Requires: shoulder bolt, bushing, castle nut and washers

Shoulder bolt:

90265A167 - https://www.mcmaster.com/90265A167/:

  • $9.77

  • M8

Bushing:

6995N114 - https://www.mcmaster.com/6995N114/:

  • $17.64

  • 10 → 14mm conversion

  • 16mm long

  • 1mm longer then necessary but should still work

Castle Nuts: (total cost: $21.54)

 Requires: M10, M8, 10-32

M8: x1 (need 1 per wheel)

93760A222 - https://www.mcmaster.com/93760A222/:

  • $3.52 pkg. 5

M10: x1 (need 5 per wheel)

93760A233 - https://www.mcmaster.com/93760A233/:

  • $6.87 pkg. 5

10-32: x1 (need 2 per wheel) Does not work for 10-32 bolt

91853A510 - https://www.mcmaster.com/91853A510/:

  • $11.15 pkg. 5

Washers: (total cost: $29.67)

 Requires: M10, M8, M6, 10-32

M8:

98689A116 - https://www.mcmaster.com/98689A116/:

  • $9.43 pkg. 100

M10:

98689A117 - https://www.mcmaster.com/98689A117/:

  • $14.86 pkg. 100

10-32:

92141A221 - https://www.mcmaster.com/92141A221/:

  • $5.38 pkg. 100

  • No labels