Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 29 Next »

Controller Board

Validation Steps

Status

Blockers

CAN

IN PROGRESS

GPIO_IT

IN PROGRESS

ADC

DONE

I2C

IN PROGRESS

SPI

  • General Hardware verification

BLOCKED

Need SPI sensor to test further

Centre Console

Validation Steps

Status

Blockers

PCA

  • Verify outputs of IO expander

BLOCKED

Buttons

  • Verify button presses are read in test task
  • Test pressing all at once, ensure all events are received

7-Seg Display

  • Check that you can enable/disable output
  • Verify all 3 displays operating

Drive FSM

Centre Console Validation Steps

Power Distribution

Validation Steps

Status

Blockers

Outputs

  • I2C write
    • Verify operation of PCA9555 library (toggle_state, set state, init), make changes for storing values Arvind Sanjay
  • I2C read (Mitchell Langdon Ostler)
    • PCA get state
  • Verify Operation of Load switches using bts_load_switch driver Adhiraj Singh
  • Verify Operation of Outputs using Output Config Adhiraj Singh
  • Verify current readings
  • Verify multiplexor with current readings
  • Trigger Undervoltage/overvoltage conditions, see if it triggers interrupt (do after everything else in case board explodes)

IN PROGRESS

  • Need output config merged for last verification

Output Read verification

  • Verify Outputs are successfully read in main loop

BLOCKED

Need gpio expanders verified

Lights FSM verification

  • Verify by setting can messages internally
  • Verify by sending can messages over PEAK CAN

BLOCKED

Need all previous verified

Power FSM Verification

  • Verify by setting can messages internally
  • Verify by sending can messages over PEAK CAN

BLOCKED

Need all previous verified

Telemetry

Validation Steps

Status

Blockers

HC-12

  • Develop basic tooling and verify connection/data transfer

IN PROGRESS

Getting hardware

LoFa

  • Develop basic tooling and verify connection/data transfer

UV Cutoff

Validation Steps

Status

Blockers

Load Switch

  • Check that load switches work, and isense can be read

Preston Glicerio Dresser

IN PROGRESS

VBAT_Status

  •  

  • No labels