CAN

• Loop back mode Mitchell Langdon Ostler
• External Controller (Peak CAN) Jarvis Weng
• Controller Board to Controller Board

IN PROGRESS

GPIO_IT

• General Hardware Verification Preston Glicerio Dresser

IN PROGRESS

ADC

• General Hardware Verification Mitchell Langdon Ostler

DONE

I2C

• General Hardware Verification Adel Chinoy

IN PROGRESS

SPI

• General Hardware verification

BLOCKED

Need SPI sensor to test further

Outputs

• Verify Operation of IO expanders using smoke test Adhiraj Singh Arvind Sanjay
• Verify Operation of Load switches using bts_load_switch driver
• Verify Operation of Outputs using Output Config

IN PROGRESS

• Need output config merged for last verification

Fan Controllers

• Develop Smoke Test
• General hardware verification of Fan Controllers

IN PROGRESS

Output Read verification

• Verify Outputs are successfully read in main loop

BLOCKED

Need gpio expanders verified

Lights FSM verification

• Verify by setting can messages internally
• Verify by sending can messages over PEAK CAN

BLOCKED

Need all previous verified

Power FSM Verification

• Verify by setting can messages internally
• Verify by sending can messages over PEAK CAN

BLOCKED

Need all previous verified

HC-12

• Develop basic tooling and verify connection/data transfer

IN PROGRESS

Getting hardware

LoFa

• Develop basic tooling and verify connection/data transfer

Load Switch

• Check that load switches work, and isense can be read

IN PROGRESS

VBAT_Status

• Trigger Undervoltage conditions, see if it triggers interrupt.