Put any notes, research, thoughts, presentations, anything here!
This was the procedure for sample cell testing.
MSXIV Li-ion Cell Testing Procedures (for cell selection)
A note from the above source says that it would have been much more accurate to use a Source Measurement Unit that can regulate the rest time between charge and discharge. This source explains what this is. We may need to look into purchasing this. (NVM they cost too much, but we could borrow a demo unit)
https://www.analog.com/en/analog-dialogue/studentzone/studentzone-december-2017.html
The procedure and results from Bulk MS14 tests are here.
High voltage devices are dangerous so we should read up on safety before doing testing in the bay.