Mech Onsite Fall 2021

Weekly Goals

Week	End of Week Goals	Notes
September 26 - October 2	Aero: Machine hood mold (~~Tuesday~~) - Thursday - was not done last week Multimatic To figure out vacuum bag situation (Multimatic Min Qian Lu (Deactivated)) ~~Set the Multimatic dates (Min)~~ ~~Aim to complete 50% of the total layup of the whole side pane~~l 50% of 1 half side panel is done, 30% of other half side panel - was completed The following will be started after side panels Start mold prep (polish the part, add layers to prevent sticking) on the hood mold bonus: Decide whether or not to split bridge mold, and prepare MDF for machining Dispose of the "oven" into dumpster Begin material preparation for the hood panel (carbon fiber, etc.) B-Bulkhead machining (the blank is done, waiting to ask Brian if/when he can machine it), not an urgent part Infusion: No more testing required! Interiors: Catamaran: Nothing planned for this week ~~Taking measurements for door handles~~ now have access to CAD	New MDF won't be worked on until reading week? But this limits concurrent work.
Oct 3 - Oct 9	Aero ~~Check-in with Brian to make sure the hood mold is machined~~ MDF Failed in machining - need to be disposed Brian has machined a bit of the hood mold using foam, to check/review tomorrow ~~Complete the full layup of the whole side panel~~ Multimatic Need to figure out how we want to hold vacuum on the bag @ Multimatic - will confirm with Multimatic about process B-Bulkhead need 1/2" core to be used in the panel (Tentatively) Weekend working sessions is on the Hood mold if side panel layup is done Logistics to Transport Side Panel Thurs. Working Session Packing materials to be ready to bring to Multimatic Friday 10:30 AM - Start loading and packing the trunks + Forklift with Graeme 11:30 AM - leave from Waterloo 1:30 PM - Arrive and unload at Multimatic 2:00 PM - Leave from Multimatic - Michael & Mackenzie 4:00 PM - Arrive at Waterloo Tentative 5:00 PM leave from Waterloo 7:30 PM arrive at multimatic 8:00 PM leave from Multimatic 10:00 PM arrive in waterloo and return vehicle Otherwise: Tuesday morning load & transport To dos: Book vehicle for full Friday Book vehicle for full Tuesday	Can start front bridge molds (with current MDF) - must figure out how they will be designed/manufactured Multimatic: Logistics for shipping and what we need to pack Logistics for vehicle rental/school vehicle
October 11 - 17	Dynamics Finish full inventory check of all assemblies (Front + Rear Suspension, Brakes, Steering) Create order list of all off-the-shelf parts still needed (if necessary) Create manufacturing list of all custom-made parts still needed (if necessary) To Dos: