Folder Path:
D:\Users\Roo\Documents\GrabCAD\MSXIV sims\MS-CHASSIS\Spring 2021 Reinforcement Sims
File Name:
September 25_Rev9.1
This project file was created using Rev 9.0 as the base project.
All 4 passenger masses were turned on.
Front Bar - Passes
Back Bar (Failed to Compile) - Need to fix
Failed to compile solution.
There were contacts between the collision object and chassis tubes that were marked as red (by the contact tool). These have not yet been resolved.
Side 30 Wall - Passes
Side 60 Wall
MAYBE JUST FIX THIS CAD MODEL AT THIS POINT??? IT’S FAILING AT THE TIP???
A Pillar - Passes
B Pillar - Passes
C Pillar - Passes
Front 30 Wall
I wonder if it’s because the contacts aren’t set correctly?
E.g. the small tube and the long tube does not have a contact between them. Force isn’t transferred between them?
Front 60 Wall
Gussets were added. Try super tube now?
Or wait no ---- geometry error causing the tip to fail?
Top 60 Wall
Top
rip error
Top 30 Wall
Combined Loading (Roll-Over) - Incomplete
It is the case with the pucks.
It needs to be setup using previous examples.
Advisor: Jason He
It is slightly lower priority because the combined loading condition could be interpreted as an average of multiple cases listed above.