Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 11
Next »
This document outlines the methods of manufacturing as well as the equipment needed for such methods.
Machining Plugs
Click here to expand...
Part | MDF Sheet Dimensions (mm) | Order |
|---|
BatteryBoxWallPlug | 309.65 x 1170 x 20 (x3 sheets) | 1.5” x 4” x 20mm (x3 sheets) |
BatteryBoxBottomPlug | 795.66 x 1170 x 20 (x2 sheets) | 3” x 4” x 20mm (x2 sheets) |
BatteryBoxLidPlug | 808.36 x 1170 x 20 (x3 sheets) | 3” x 4” x 20mm (x3 sheets) |
RearElecLeftWallPlug | 309.65 x 1062.45 x 20 (x4 sheets) | 1.5” x 3.5” x 20mm (x4 sheets) |
RearElecRightWallPlug | 309.65 x 1062.45 x 20 (x4 sheets) | 1.5” x 3.5” x 20mm (x4 sheets) |
RearElecBottomPlug | 753.76 x 1001.66 x 20 (x2 sheets) | 2.5” x 3.5” x 20mm (x2 sheets) |
RearElecLidPlug | 798.36 x 1071.06 x 20 (x3 sheets) | 3” x 4” x 20mm (x3 sheets) |
Final Order | | 1.5” x 4” x 20mm (x11 sheets) 3” x 4” x 20mm (x10 sheets) |
Molds and Final Fibreglass Parts
Mold Manufacturing Plan
Final Fibreglass Part Manufacturing Plan
Click here to expand...
Order of Manufacturing (First to Last) | Method |
|---|
BB Bottom | Wet Layup |
RE Bottom | Wet Layup |
BB Wall (x2) | Infusion |
BB Lid | Infusion |
RE Right Wall | Infusion |
RE Left Wall | Infusion |
RE Lid | Infusion |
Misc. Components Manufacturing Plan
Click here to expand...
Securing Brackets
Refer to the Polycarbonate map for bracket cutouts.
Cut the brackets from the polycarbonate sheet (vertical band saw or waterjet, method TBD).
Label each bracket according to the diagram below.
There are 4 different bracket variations