Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Lights will be mounted to the bottom of the car, not the trunk panel. They will stay in place when the trunk panel lifts.

Top lights will be mounted to the roof panel, with a panel-mounted 8 pin MX150L also connected to the roof.

The MX150Ls are only waterproof on the plug side not on the panel mounted side,so we might want to consider placement a little more closely near the trunk lines.

~6” from the back edge of the car to get a 3cm height for the MX150Ls

Proposal Aug 2, 2020

Note - we may switch to just having 1 BPS strobe (not alternating) but the most pins we would require is 8 using the configuration shown, so protecting for that.

  • No labels