Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 6
Next »
Interesting research, images, links, recap of regulations, etc.
| Notes: |
|---|
 | Illuminated “light strips” from audi concept Q7 |
 | Tesla model X |
 | Lightyear One |
Concept sketches
Screenshots
File links or locations
Date (YYYY-MM-DD) | Notes |
|---|
2020-05-25 | Layed-out initial CAD model architecture: Headlight Lens to be thermoformed polycarbonate and will be glued and fit to aerobody flanges (side panel, hood, panel, bottom panel) Headlight Housing to be 3D printed in sections (relatively large part) and will be fastened or glued to interior of aerobody
|
2020-06-05 | Took screenshots of CAD and added to confluence. Came to conclusion that headlight has the potential to be really big (see poorly dimensioned “drawing”). Will need to determine what maximum feasible size of lighting elements are for DRL and front turn signal |
