Performance
The ideal diodes work as intended for the most part - the output voltage is approximately equal to the supply voltage for all voltages >0V.
For lower voltages (Vin < 3V), the voltage drop across the diode is slightly higher than for higher voltages, approximately 0.24V.
The voltage drop across the diode for higher voltages is constant at around 0.07V.
Layout
Layout is probably based on the layout above, judging by the parts on the board.
Parts List
Ideal diode controller:
https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4359.pdf - part marking: LTFKD e3
Power diodes:
https://www.infineon.com/dgdl/Infineon-IPP_I_110N20N3G_IPB107N20N3G-DS-v02_03-en.pdf?fileId=db3a3043243b5f170124968e7d1f18e7 - part marking: 107N20N
Rectifier:
https://www.onsemi.com/pub/Collateral/ES1J-D.PDF - part marking ES1G
Resistors:
-10MOhm
-100kOhm (x2)
-1kOhm