Solidworks

Creating a Part

Creating an Assembly

Creating a Drawing

Use the Midnight Sun sheet format

1. Select File → New → Drawing or File → Make Drawing from Part/Assembly 
2. When prompted for sheet format, select "Browse"
   
3. Navigate to \<GrabCADFolder>\StandardComponents\Templates and select MidnightSunANSI-B.slddrt. 
4. Click "OK"
5. Select File → Properties, then click "Custom"
6. Enter the appropriate information into the fields. 
7. Save your document and the title block should automatically update. 

Tip for making great drawings

• Use baseline dimensions. Include a dimension table if the drawing begins to look cluttered or you run out of room
• Use section views or auxiliary view where appropriate
• Add notes for clarity 
• Make sure there is a visible gab between your dimension lines and object lines

When in doubt, refer to your ME/MTE100 workbooks (praise Jim Baleshta)