These ICs work together in an active clamp flyback converter topology:
...
I think this one is good for our application:
https://www.digikey.ca/en/products/detail/power-integrations/INN4074CINN4077C-H185H182-TL/1431915016967692
(Updated to support max current capability of 3.4A Peak)
...
Lots of design examples are provided in the ‘design examples’ of the InnoSwitch page:
...
Bias winding to supply at least 4mA of current to BP1 and BP2 pins
...
Efficiency
...
We will spec our parts to have 100% load at ~60W, so nominal load of 30W is 50% load
...
For DCM, tHLDLis a function of fet capacitance and leakage + magnetizing inductance of transformer
...
If constant current regulation is not required, the ISENSE pin must be tied to SECONDARY GROUND pin
Component Selection
Clamp Capacitor
...