Page Comparison

...

Sketch Geometry

• PUT THE ORIGIN IN A USEFUL POSITION
• Try to use relations whenever possible. For example, if you want to put a hole in the middle of an object use center lines and midpoint relations rather than dimensions. 
• Don't do fillets or chamfers in sketches

...

• We will be using metric fasteners whenever possible
• Do not use toolbox fasteners. Try to use fastener already in trunk whenever possible. Otherwise find a CAD model on McMaster and download the model. Make sure to delete the default custom fields and add the VendorNo field. Fasteners should also have "Y" set in the "IsFastener field" 
  
• Try to spec Spaenaur fasteners whenever possible. If you want to use a fastener that Spaenaur does not sell, check with a Mech lead first. 
• Make sure to suppress threads in fasteners.
• Fasteners should only occupy part numbers 10xxx in the drawing number registry
• Save the fastener according to the naming convention if you are adding it to trunk. Update the drawing number registry accordingly.

...

1. Select File → New → Drawing or File → Make Drawing from Part/Assembly 
2. When prompted for sheet format, select "Browse"
   
3. Navigate to \<GrabCADFolder>\StandardComponents\Templates <GrabCADFolder>StandardComponentsTemplates and select MidnightSunANSI-B.slddrt. 
4. Click "OK"
5. Select File → Properties, then click "Custom"
6. Enter the appropriate information into the fields. 
7. Save your document and the title block should automatically update. 

...