...
Present a few options with screenshot locations and discuss pros and cons.
On left side bar beside under trunk hinges
Pros:
Short wiring lengthShorter wiring run when compared with placing it on trailer bars, decreasing electrical losses
Cons:
May conflict with charger, trunk hinges (Check)
On top of catamaran cover
Pros:
Cons:
On floor panel
Pros:
- Cons:
Longer wiring runs compared to catamaran cover.
Possibly difficult to access
On top of Catamaran Cover (which runs between the A and C planes, in the middle of the car)
...
Pros:
Short wiring run which decreases electrical loss
Does not interfere with the trunk hinges
Cons:
Makes accessing rear electronics enclosure more difficult
Adds extra weight on top of Catamaran cover
Flat against trailer bars
Pros:
Does not interfere with trunk hinges
Cons:
A lot of electrical loss due to the long wiring needed to go
Note this page about locations on the chassis: Chassis Mounting Reservations (Slide 40 in the linked google drive presentation is about the Solar Enclosure)
Areas of Caution
Chassis Considerations
Braking Mechanism on lower left area of C-Plane
Reason: Interferes with the rear brake lines of Dynamics Assembly
...
Seats near the C-Bulkheads
Caution: Seats block us from placing the solar enclosure on the front-facing side of the Bulkhead C
...
Trunk Hinges
Caution: Do not mount enclosure in the upper part on the back of the C-Plane as this will interfere with the trunk hinges.
...
Seat Belt Mounts on Middle-Lower section of C-Plane
...
Electrical Considerations
Charger and ACS Charge Monitor
Caution: Space limited on the rear trailer bars for placing the solar enclosure placement
...
Vehicle Charger Input
Caution: Don’t place the solar enclosure near the top left and right sides on the C-Plane as it interferes with the charger inputs and the trunk hinges
...
Brake Light
Caution: Make sure that the solar enclosure does not interfere with the brake lights
...
Motor Controllers on the trailer bars
Type: secondary consideration
...