Page Comparison

JIEUN

• Deadline for sheet metal: On the outside, can be gathered last (2024 Al) (3-4 mm)

• Fabric: next steps?

  • Originally have Lovisa if she can go to Ethan & Allen

RENZO

• Got a 3D printer over the weekend

  • can prototype stuff at home

• Assembly plans are coming along

  • Working in parallel with Battery box (Micah black)

  • Just the outer fibreglass stuff for now

• Kristen is planning to purchase soon (click bonds, MDF, and mold stuff)

• Start researching MDF CNC

IVAN

• Finish manufacturing plan by October 31st

  • Still catching up on lectures rn

FABRICS (Jieun)

• Lovisa to look at Ethan Allan offline store

• Confirmed concept & fabrics

  • Just need to figure out where to get it from

• Sheila to give new members tasks

FORM FACTOR (Renzo)

• MDF 20mm thick sheets ✅

  • sheets to be cut down after purchase

    • From forestproducts

• Brackets for supplier interfacing

• Click bonds to be supplied through Kristen?

  • Need part names + quantities

• 3D print started for testing

• Manufacturing can begin when MDF is delivered

• To update BOM

MATERIALS (Ivan)

• Can't use Nomex

  • New foam = Divynice HM80 foam (PVC foam)

    • Sourced from Composites Canada

• Epoxy resin

  • Amount needed ✅

  • No specific product

  • Aeropoxy PR2032

• Need mold release

• Ask Min for sealant tape

CAD changes

• Send model numbers and CAD to Renzo (Micah)

• Raise rear elec enclosure walls at firewall

• Change 4 fans to 3 and center

• Move rear elec back to make space for additional row of 4 fans

• Change holes to vertical slots on support walls and open up sections for wiring

• Move latch cover away from contactor

• Move wire openings to top of rear elec divider walls

• Add clickbond studs to third rear elec bottom panel

• Fillet corners on rear elec bottom panels

• Redesign battery module securing brackets with extra vertical support (try to minimize number of fasteners) and do bending calculations

• Add connection ports to port cover

• Move port cover in between PCBs

Image Added

Image Added

Updates:

Finalized all materials needed - urethane foam (fibreglass foam core) and epoxy resin.

Message Micah Black about the seal… waiting for a reply.

“Marking” is different from “seal”

Ivan’s break is at 8:30-9:00 pm

Next Steps:

Manufacturing plan for molds.