Page Comparison

...

https://www.youtube.com/watch?v=zgHlUwgiARo&ab_channel=ElectricVehiclesSpace

Here is how to arrange the cells to make a battery pack | ELECTRICBIKE.COM,

module testing stuff:

Learn the Fundamentals of Battery Module and Pack Test - YouTube

...

data sheet for our cells: PRODUCT SPECIFICATION (dnkpower.com)

asc 24' regulations: ASC2024-Regs-EXTERNAL-RELEASE-B.pdf (americansolarchallenge.org)

Objectives

1. Build on top of Micah’s progress and push the limits of module design

2. Make quality documentation

To-do:

1. Verify battery rules & pack config regulations and our pack spec | June 2nd (KOSTUBH)

2. Assemble Hardware Assembly v7 | June 16th

3. Spot-weld nickel strips

4. Add voltage taps (figure out how quantity, and where)

   1. on cells for SoC algo testing

   2. on groups for balancing

Thermistor placement, quantity (we need to iterate, I don’t think the plan below is good)


1. Materials

   1. Find spot welder

   2. Find thermistors

   3. Find DAQ

2. DAQ

   1. I/O with PC

   2. header soldering (Donna Kim )

   3. thermistor assembly (Darton Phoebe Luo )

   4. thermistor placement (Module Testing Wiring Schematic - Google Slides

   : need to source all these components listed above

   1. )

3. Spot-weld nickel strips

5. Testing procedure | June 30th

   1. DAQ setup

   2. Charge/DIscharge Discharge profiles

6. CAD Module Iteration | July 14th

7. Build v8 | July 21st

8. Test | July 28th

9. TBD

Phoebe’s Ongoing to-do list (in order):

•  Figure out DAQ and thermistor placement
•  Look into how to attach the thermistors
•  Figure out what parameters you want to test
•  Heat on the bus bars

Notes / Documentation:

...