Referencing from (new): Elec / Interiors Dashboard Planning
...
Team members: Cordelia Pui Men Yu (Deactivated) Joy He (Deactivated) Renzo VillanoyAli Arshad Kenneth Lee Hadi Khadra
Roles: TBD
...
Hardware / dashboard Dashboard integration meeting notes (09/23/2020):
| Expand |
|---|
everything in purple we basically need to see on the dash kill switch = red button - something's going wrong, stop the car button p indicator switch = parking indicator switch there should be a power switch, but not currently on diagram P LED = indicates we're in park already purchased D, N, R, (can’t remember if there was another button they already have - Renzo Villanoy do you remember which other one they said ?? if not, will ask again) fan control: knobs you can turn to certain point and it clicks on AUX, Race/Normal Fault LED --> when that LED is on, activates something outside and also on top of car Fans 1-4 will be mounted on the dash and wiring will run through on the inside all blue squares are enclosures and all red boxes are connectors which need to fit on enclosures front electronics enclosure should be accessible but does not need to be EASILY accessible - ie could be unscrewed or smth - don't want it to be a big box like old car there will be slits on the front of the car which will be connected to the fans so there will always be airflow driver display area has 4 screens --> all connects to the steering wheel pedal board enclosure should be waterproof can ignore side lights box kill switch should be flush with car, just needs opening, should not be easily pressed (front driver, front passenger) side misc. --> adrian has ideas for it already, talk to adrian about it basically: we're taking care of pedal board enclosure, front electronics enclosure, infotainment display area, driver display area
|
Hardware / Dashboard integration meeting notes (06/10/2021):
| Expand |
|---|
zoom_0.mp4  Image AddedCareful with the things sticking out, no protrude (design a cover that is more flush with the enclosure) (more knob) If you want a logo we can The dcdc convertor in rear The auxiliary at the front there will also be a pedal board Biggest preference if anything has to be taken out it can all be taken out (mounts are designed by electrical team) Steering wheel New clockspring fit into the old steering wheel (is it possible to reuse the old wheel) reuse the stalk still need a custom wheel part and attach to the stalk board with button is in grad cad (steering wheel interface) horn: is it separate another button through the center (just has to be on the wheel) free placement on the wheel (center is best) which button is up to interiors (5/6/7cm diameter button) might need something a bit smaller horn input to steering interface board (separate button) radio push steering interface board cruise control (button form) regen brake toggle through clockspring into the other board in the wheel
 Image Added6 cables routing Side lights and cameras (separate enclosure) wiring to them module needs to pop vertically out Mobius cameras https://www.mobius-actioncam.com/packages/mobius2/ Considered where to place any of the boards (boards will be placed around internal structure of the dash Parking brake lever is mounted around the driver Are we expecting to have any interior lighting? (not really) Ventilation slits in the front of the car for air (still happening not sure where aero has decided to put the cut and routed to the fans using ventilation tubes) Must be air intake from outside (re-read regs) Pedal enclosure will need another enclosure near there CAN debug will also want another enclosure Â
 Image AddedWhere we can put central console Closure switches have shorter routing Something else that should probably be mentioned that we didn’t get a chance to talk about is that there needs to be an additional space somewhere behind or adjescent to the driver display to have a raspberry pi with a few peripherals attached to both control driver display and host our telemtry communications - just something to keep in mind
|
·      Â
