Page Comparison

...

1. Heat gun for rework

2. Agilent Power Supply

   1. The red and black alligator clips, or at least banana:banana - alligator clips

   2. ultra-fit power connection

3. Weller Soldering Iron

   1. Solder, flux

   as well

   1. , copper braid, solder tips,

   solder braid cleaner

   1. brass sponge, solder paste,

   kaptone

   1. kapton tape, extra solder tip

4. Tweezers, cutters, needle nose pliers and Exactoknife

5. Controller Boards, parts, and stencilsstencil, we should have parts for 30.

   1. The rev from JLC PCB with the pick and place panel, and the solder paste scraper blade

6. MPPTs x2 (18-33V)

7. SWD adapters + programmers (Grab box of firmware stuff)

8. Raspberry Pi 3B+, Micro SD Cards, etc.

9. DC-DC Rev 1 box from on top of the electrical shelf (make sure it has the old board, an extra heatsink, push pins and module)

10. PEAK CAN-USB adapter

11. Small spool of 22 gauge wire (preferably two colours)

12. Molex crimp tools + microfit/ultrafit/duraclick crimps?