3D printing on PRUSA with PETG => set nozzle temp to 240
Can use blocks to make cell layout => edit the BLOCK file (open in solidworks, select all files when searching for file in solidworks) to edit the layout of all the cell holder parts at once
For my designs, when changing the block file, need to rebuild twice for the files dependent on block file
Use driven dimensions in sketches to make linear patterns responsive to changes in the block
Thermally conductive standoffs
18-8
Thermal diffusivity, mm2/s (in2/s) | 3.84 (0.006) |
Thermal conductivity, W/m·K (Btu/ft·h·°F) | 16.2 (9.4) at 100 °C (212 °F) |
21.5 (12.4) at 500 °C (932 °F) | |
Coefficient of thermal expansion (CTE), 10-6/K (μin./in·°F) | 17.2 (9.6) at 0-100 °C (32-212 °F) |
17.8 (9.9) at 0-315 °C (32-600 °F) | |
18.4 (10.2) at 0-538 °C (32-1000 °F) |