...
- Mux has the wrong footprint
- Missing 22uF cap in the BOM
- Update outdated notes on isoSPI mode
- Need to connect ground directly to C0_F or C0 in addition to existing cap
Carrier
Revision 1
...
- isoSPI Mode 0 by default (for current sense)
- Add connector for kill switch
- Add ability to switch between master/slave and modes on isoSPI so we can use it as a sniffer
- Bias resistors are flipped and are odd values - should be the same as AFE
- Needs test points for 3v3, 12v, and GND