Page Comparison

Fixtures

...

Loading

...

Mesh Settings

...

Material yield strength: 460 MPa

Brake + Right Turn

...

• Most positive Fx load case

• Max stress not converging, but stays within a small range << material yield strength → PASS

Max Node Size (mm)	Mesh Picture, after h-adaptive refinement	Max Stress (MPa)Nominal Stress (MPa)	Location/Results
5.63	Image AddedImage Added	4.44	Image AddedImage AddedImage Added
4.53	Image AddedImage Added	6.405	Image AddedImage AddedImage Added
3.57	Image AddedImage Added	5.946	Image AddedImage AddedImage Added
3.01	Image AddedImage Added	7.646	Image AddedImage AddedImage Added
2.16	Image AddedImage Added	9.071	Image AddedImage AddedImage Added

Recommendations

Could add a fillet on the boss edge to reduce the stress concentration there, as seen in the above loading cases.