Staking | Swaging | |
|---|---|---|
Machinery requirement | Hydraulic press/arbor press at least 75 000N force | drill press |
Tool cost | Less expensive | More expensive |
limitation | can Can damage ptfe PTFE lining, or cause bearing wall to deform | Hard to preform, require more practice to get right. Could destroy v-groove if done incorrectly |
According to ChatGPT Mar 14 Version
Staking is the process of using a punch or similar tool to deform the metal around the bearing to hold it in place. The punch is typically applied around the circumference of the bearing at specific points, causing the metal to protrude into the raceways of the bearing, securing it in place.
...
Alternatively:
A much simpler bearing retention method is with a bolted plate on the bearing housing when space is not a concern.