...
Part Number | Description | Quantity | |
|---|---|---|---|
1 | Chassis | 1 | |
2 | 3/4”-16 RH Rod End (60645K18) | 1 | |
3 | Bearing Lower Column Mounting Plate Lower | 1 | |
4 | 3/4”-16 Nut | 12 | |
5 | M8x1.25-45 SHCS | 2 | |
6 | M8 Flex Top Locknut | 2 |
...
Place the bearing plate lower (Part #3) on the chassis (Part #1) such that the 2 holes of #3 are aligned with the 2 holes of #1.
2. Insert the 2 screws (Part #5) into the holes of # 3. Thread the 2 nuts (Part #6) onto the screws and tighten.
...
4. Put the 3/4” nut (Part #4) onto the threads of #2 until the nut hits #3. Do not tighten.
09/19 revision note: Not shown in photos; add second (#4) onto rod end to act as jam nut, tighten against the first nut.
...
Front view of the rod end and the nut
...