| Info |
|---|
i’m an idiot i should have done the maximum tensile case of bwd left acceleration. lmk if these sims look ok and i’ll come back to do that load case! Jens Dekker |
| View file | ||
|---|---|---|
|
Fixtures
...
Loading
...
Mesh Settings
...
Max Node Size (mm) | Mesh Picture | Max Stress (MPa) | Nominal Stress (MPa) | Location/Results |
|---|---|---|---|---|
5.63 2.67 (on flange edge) |  
| 7.146 | 0.02862 |    |
4.53 2.67 (on flange edge) |  
| 7.683 | 0.02972 |    |
3.57 2.67 (on flange edge) |  
| 11.15 | 0.03499 |    |
3.01 2.67 (on flange edge) |     | 16.38 | 0.0352 |   
|
2.57 1.66 (on flange edge) |  
| 54.57 | 0.01217 |   |
Bwd right acceleration
Nominal forces on the hub nut body appear to be converging-ish around 0.0125 MPa
Max stress 29.47 MPa < 460 MPa → PASS
...
Max Node Size (mm) | Mesh Pictures, after h-adaptive refinement | Max Stress (MPa) | Nominal Stress (MPa) | Location/Results |
|---|---|---|---|---|
5.63 2.67 (on flange edge) |   | 29.47 | 0.01277 |   |
4.53 2.67 (on flange edge) |   | 31.84 | 0.214502145 |   |
3.57 2.67 (on flange edge) |   | 39.44 | 0.01507 |   |
3.01 2.67 (on flange edge) |   | 42.42 | 0.01049 |   |