| Info |
|---|
i’m an idiot i should have done the maximum tensile and then the maximum compressive casescase of bwd left acceleration. lmk if these sims look ok and i’ll come back to do that load case! Jens Dekker |
| View file | ||
|---|---|---|
|
Fixtures
...
Loading
...
Mesh Settings
...
Max Node Size (mm) | Mesh Picture | Max Stress (MPa) | Nominal Stress (MPa) | Location/Results |
|---|---|---|---|---|
5.63 2.67 (on flange edge) |  
| 7.146 | 0.02862 |    |
4.53 2.67 (on flange edge) |  
| 7.683 | 0.02972 |    |
3.57 2.67 (on flange edge) |  
| 11.15 | 0.03499 |     |
3.01 2.67 (on flange edge) |     | 16.38 | 0.0352 |   
|
2.57 1.66 (on flange edge) |  
| 54.57 | 0.01217 |   |
Bwd right acceleration
Nominal forces on the hub nut body appear to be converging-ish around 0.0125 MPa
Max stress 29.47 MPa < 460 MPa → PASS
...
Max Node Size (mm) | Mesh Pictures, after h-adaptive refinement | Max Stress (MPa) | Nominal Stress (MPa) | Location/Results |
|---|---|---|---|---|
5.63 2.67 (on flange edge) |   | 29.47 | 0.01277 |   |
4.53 2.67 (on flange edge) |   | 31.84 | 0.02145 |   |
3.57 2.67 (on flange edge) |   | 39.44 | 0.01507 |   |
3.01 2.67 (on flange edge) |   | 42.42 | 0.01049 |   |