...
| View file | ||
|---|---|---|
|
Recommended: It is always good to separate different objects as 2 separate parts when working in CAD! Try to start a new assembly, insert the provided part and create a new part for the rollcage. Try to figure out how to work with two parts in a single assembly with in-context sketches. This is a little hard to feel free to reach out if you are stuck! (although working in a single part is also fine in this task)
(When exporting an assembly file for review, go to files → pack and go → export as a zip file)
Constraints:
Must have hoop at the front and rear of the driver’s head
Cage must have 50 mm offset from the driver’s head
Deflection guards at the front of the roll cage to protect the driver from sides
Use the 4 given points in the file as mounting points for the roll cage
...